Product Brochure

HD-7P / HD-7W Four-Post Lifts 3 P/N 5900041 — Rev. M — July 2019
Table of Contents
Introduction 3 Operation 69
Shipping Information 4 Maintenance 73
Safety Considerations 4 Troubleshooting 75
Components 6 Wiring Diagrams 77
Specifications 8 Labels 79
FAQs 10 Parts Drawings 82
Installation Checklist 11
ALI Store 90
Installation 12 Maintenance Log 91
Introduction
This manual describes the following BendPak four-post Lifts:
• HD-7P: Standard width, can raise Vehicles up to 7,000 pounds (3,175 kg).
• HD-7W: Standard and wide widths, can raise Vehicles up to 7,000 pounds (3,175 kg).
Both models are
ALI certified .
This manual is mandatory reading for all users of the HD-7P and HD-7W, including anyone who
installs, uses, maintains, repairs, or wants to know more about them.
⚠ DANGER Use care when installing, operating, maintaining, or repairing this equipment; failure
to do so could result in property damage, product damage, injury, or (in very rare
cases) death. Make sure only authorized personnel operate this equipment. All
repairs must be performed by an authorized technician. Do not make modifications
to the unit; this voids the warranty and increases the chances of injury or property
damage. Make sure to read and follow the instructions in this manual and on the
labels on the unit.
Keep this manual on or near the equipment so that anyone who uses or services it can read it.
If you are having issues, refer to the Troubleshooting section of this manual for assistance.
Technical support and service is available from your dealer, on the Web at bendpak.com/support,
by email at [e-mail], or by phone at [phone], extension 196.
You may also contact BendPak for parts replacement information at [phone], extension
191; please have the model and serial number of your unit available.