Use and Care Manual
Table Of Contents
- Table of Contents
- Introduction
- Shipping Information
- Safety Considerations
- Components
- Specifications
- Installation Checklist
- Installation
- Reviewing the Safety Rules
- Gathering Your Tools
- Preparing for Electrical Work
- Reviewing the Installation Orientation
- Checking Clearances
- Selecting a Location
- Choosing a Wide or Narrow Configuration
- Installing the Safety Assemblies and Positioning the Safety Lock Cable
- Putting the Equalizing Cables into Position
- About Thread Sealants
- Identifying Hydraulic Fittings
- Routing the Hydraulic Hoses
- Creating Chalk Line Guides
- Anchoring the Posts
- Installing the Overhead Assembly and Safety Shutoff Bar
- Installing the Microswitch
- Completing the Equalizing Cables Installation
- Mounting the Power Unit
- Installing the Safety Lock Cable
- Connecting the Hydraulic Hoses
- Installing the Lift Arms
- Double Threaded Rod Installation
- Leveling
- Contact the Electrician
- Electrical Information
- Wiring the Microswitch
- Connecting the Power Unit
- Installing a Power Disconnect Switch
- Installing a Thermal Disconnect Switch
- Lubricating the Lift
- Review Final Checklist Before Operation
- Leave the Manual with the Owner/Operator
- Perform an Operational Test
- Operation
- Maintenance
- Troubleshooting
- Wiring Diagrams
- Labels
- Parts Drawings
- Automotive Lift Institute (ALI) Store
- Maintenance Log
- Maintenance Log
10AP Series Two-Post Lifts 62 P/N 5900265 — Rev. A10 — September 2023
Frame Cradle Adapters — Required for use when lifting trucks, vans or other frame Vehicles that
require additional stability. (5215761) Set of 4.
Wide Frame and Super Wide Frame Cradle Adapters — Recommended for use when lifting
heavy-duty wide frame vehicles. Wide Frame version fits frames up to 5.25 in. / 133 mm (5215828).
Super Wide Frame version fits frames up to 6.5 in. / 168 mm (5210253).
Steel Lift Pads — Recommended for additional stability on all vehicles. The flanged edges grip the
chassis for an extra-secure hold. (5215763) Set of 4
Replacement Polyurethane Tuf Pads™ — Never use your Lift with missing or damaged Rubber
Contact Pads. Always replace Pads when worn or damaged, (5700227) set of 4.
Adapter Tray — Adapter Trays allow storage of Auxiliary Adapters conveniently near the Lift Arms.
Visit BendPak.com
for accessories and replacement Parts information at (800) 253-2363, press
option 7, then 5; please have the model and serial number of your Lift available.