Use and Care Manual

10AP Series Two-Post Lifts 41 P/N 5900265 — Rev. A10 — September 2023
Installing the Safety Lock Cable
The Safety Lock Cable and the Safety Lock Release Handle are used to release the Safety Locks,
allowing the Lift to be lowered.
The Safety Lock Cable should have been installed and left in place in the Installing the Safety
Assemblies section,
The following drawing shows the path the Safety Lock Cable travels from Safety Assembly on the
Offside Post to the Safety Assembly on the Powerside Post.
Not drawn to scale. Some components exaggerated or not shown for clarity.
The following illustration shows the Safety Lock Cable connections to the Safety Assemblies.
Offside Safety: Powerside Safety: