Use and Care Manual

10AP Series Two-Post Lifts 4 P/N 5900265 — Rev. A10 — September 2023
Table of Contents
Introduction 4 Maintenance 69
Shipping Information 5 Troubleshooting 71
Safety Considerations 5 Wiring Diagrams 75
Components 8 Labels 77
Specifications 9 Parts Drawings 80
Installation Checklist 11 ALI Store 97
Installation 12 Maintenance Log 98
Operation 59
Introduction
This manual describes the four BendPak Two-Post Lift models:
• 10AP. A Two-Post Lift with overall height of 145 in. / 3,683 mm that raises Vehicles up to 10,000
pounds (4,536 kg).
• 10AP-168. A taller version of the 10AP with overall height of 168 in. / 4,267 mm, designed to
accommodate taller Vehicles.
• 10APX. A Two-Post Lift with overall height of 157 in. / 3,988 mm that raises Vehicles up to
10,000 pounds (4,536 kg).
• 10APX-181. A taller version of the 10APX with overall height of 181 in. / 4,597 mm, designed to
accommodate taller Vehicles.
All models have Overhead Assemblies and clear floors. All models may be adjusted to a narrow
92-inch (2,337 mm) or a wide 102-inch (2,591 mm) drive-through dimension.
⚠ DANGER Be very careful when installing, operating, maintaining, or repairing this equipment;
failure to do so could result in property damage, product damage, injury, or (in very
rare cases) death. Make sure only authorized personnel operate this equipment. All
repairs must be performed by an authorized technician. Do not make modifications
to the unit; this voids the warranty and increases the chances of injury or property
damage. Make sure to read and follow the instructions on the labels on the unit.
This manual is mandatory reading for all users of 10AP Series Two-Post Lifts, including
anyone who installs, operates, maintains, or repairs them. Always keep this manual on or near the
equipment.
Technical support and service is available from your dealer, on the Web at
bendpak.com/support, by email at [e-mail], or by phone at
[phone], option 7 then 4.
Online chat is also available at www.bendpak.com click the chat icon.
Scan this QR Code for up-to-date information and videos on the 10AP Lift series.