Use and Care Manual

10AP Series Two-Post Lifts 20 P/N 5900265 — Rev. A10 — September 2023
Reference only – do not scale.
Locate the Safety Lock Cable. This is a long, thin Wire Rope Cable with a Button swaged onto one
end and nothing on the other end. Thread the cable through the Offside Safety Block as shown
above. Part Number and Cable length varies based on Lift Model.
Model Part Number Safety Cable
Dia. and Length
10AP 5595793 Ø1.8 x 7,773 mm
10AP-168 5595831 Ø1.8 x 8,865 mm
10APX 5595832 Ø1.8 x 8,103 mm
10AP-181 5595833 Ø1.8 x 9,322 mm
Thread the remainder of the Safety Lock Cable under the Safety Cable Sheave and Lift Head, then
up to the top of the Offside Post. Coil the cable and secure with tape or a Zip Tie at
the top of the Offside Lift Post until called for later in the assembly.