Instructions / Assembly

4
9
3
13
11
1
12
2
6
8
7
5
10
14
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE, DERIVED FROM 5620578 02/21/2018 TM 00923
B
UPDATED TITLE TO REFLECT MARKETING,
UPDATED BOM REVISIONS
09/17/2018 TM 00996
C UPDATED BOM REVISIONS 11/14/2018 TS 01025
NEXT ASSEMBLY
5601241
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5721030 LR-10000 EXTERIOR BASE ANGLE R.H. 1 C
2 5721028 LR-10000 INTERIOR BASE ANGLE R.H. 1 C
3 5735486 LR-10000 BASE HINGE ARM STOP BAR 2 B
4 5701595 LR-10000 BASE SIDE APPROACH RAMP, R.H. 1 B
5 5701257 LR-10000 BASE APPROACH RAMP, R.H. 1 C
6 5737061 LR-10000 BASE APPROACH RAMP GUSSET 1 B
7 5736671 LR-10000 BASE APPROACH RAMP GUSSET, LONG 1 B
8 5737060 LR-10000 BASE APPROACH RAMP SUPPORT 2 C
9 5736668 LR-10000 BASE APPROACH RAMP SUPPORT, LONG 2 B
10 5736670 LR-10000 ANCHOR PLATE 2 B
11 5735489 LR-10000 BASE APPROACH RAMP SPACER 1 B
12 5701498 LR-10000 BASE SIDE TROUGH 1 B
13 5735648 LR-10000 BASE APPROACH RAMP SPACER, SHORT 1 B
14 5737063 LR-10000 ANCHOR PLATE, LARGE 1 B
SHEET 1 OF 3
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
C
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED.
TM
5620626
LR-10000 BASE
WELDMENT, R.H.
02/19/2018
DO NOT SCALE DRAWING
1:15
SCALE:
THIRD ANGLE PROJECTION
CA 11/26/2018
BREAK AND DEBURR ALL SHARP EDGES 0.3mm 1.
REMOVE ALL WELD SPLATTER 2.
DIMENSIONS ARE IN MM
TOLERANCES:
0. = ±1.5
0.0 = ±0.5
ANGULAR: 0. =
2
°
SURFACE FINISH 1.6 ISO Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED