Full Product Manual

ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
2
1
3
4
ITEM NO. PART NUMBER DESCRIPTION QTY. REV
1 5731042 P9000 SAFETY LOCKOUT BAR, R.H. 1 D
2 5530332 FHS M8 x 1.25 x 25 2 -
3 5746092 P-6B/9000 SERIES SAFETY RELEASE BUNG 1 B
4 5601052-1 SAFETY BAR EXTENSION 1 --
WHERE USED
P9000 SERIES
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
B UPDATED BOM REVISION 10/28/2016 TS 00781
C
C-001
WAS 17 NOW 23, REPLACED 5530002 WITH
5530332, UPDATED PAINT COLOR AND BOM
REVISION
ADDED 20% GLOSS PAINT NOTE
07/20/2017
04/17/2020
TM
CA
00852
01161
D
ADDED 5601052-1, 5746092 DISTANCE WAS 23
NOW 44, WAS 105 NOW 80, UPDATED BOM
REVISION
08/23/2022 TM 01433
NEXT ASSEMBLY
5215498
SHEET 1 OF 2
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
D
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
TM
5601052
P9000 SAFETY LOCKOUT
BAR WELDMENT, RH
11/10/2015
DO NOT SCALE DRAWING
1:3
SCALE:
THIRD ANGLE PROJECTION
OR 08/25/2022
DIMENSIONS ARE IN MM
TOLERANCES:
0. = ±1.5
0.0 = ±0.5
SURFACE FINISH 1.6 ISO Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
BREAK AND DEBURR ALL SHARP EDGES 0.3mm 2.
REMOVE ALL WELD SPLATTER 3.
DIMENSIONS SHOWN ARE AFTER PAINTING 4.
PAINT GRAY (RAL-7024) 20% GLOSS 5.
THREADS MUST BE CLEAN AND FREE OF ALL WELD 6.
SPLATTER AND PAINT
NOTE: UNLESS OTHERWISE SPECIFIED.