Quick Reference Guide Instruction Manual

KSN 765/770 Integrated Communication Navigation Display Pilot QRG
D200909000026 Page 37
REV 2 Jun 2014
Modify or Delete an Existing Hold
To edit or delete a hold that has already been inserted
into a flight plan, complete the following procedure:
1. Use the joystick knob or touchscreen to highlight the
waypoint in the FMS Waypoint List window.
2. Push the Procedure ( PROC ) bezel softkey.
3. Push the HOLD bezel softkey.
4. If modifying the hold (or reviewing an existing hold),
push the Modify ( MOD ) bezel softkey.
The Modify Parameters window is then displayed.