Quick Reference Guide Instruction Manual

KSN 765/770 Integrated Communication Navigation Display Pilot QRG
D200909000026 Page 29
REV 2 Jun 2014
EXECUTE A DIRECT-TO
The following pages describe how to execute a
Direct-To.
Direct-To a Waypoint in the Flight Plan
The following procedure describes how to perform a
Direct-To a waypoint in the flight plan.
1. Push the Direct-To key ( D  ).
The DIRECT TO pop-up window is displayed.
2. Use the joystick knob or touchscreen to select the
desired flight plan waypoint, then push the joystick
knob or push the touchscreen twice to perform the
Direct-To.
Execute a Direct-To