Proprietary Notice This document and the information disclosed herein are proprietary data of Honeywell Inc. Neither this document nor the information contained herein shall be reproduced, used, or disclosed to others without the written authorization of Honeywell Inc., except for training on recipient's equipment. Notice - Freedom Of Information Act (5 USC 552) And Disclosure Of Confidential Information Generally (18 USC 1905) This document is being furnished in confidence by Honeywell Inc.
KSN 765/770 Integrated Communication Navigation Display Pilot QRG TABLE OF CONTENTS Flight Management System (FMS) Overview ............... 3 Enter a Flight Plan ........................................................... 5 Enter a Departure Airport ............................................. 5 Enter an Arrival Airport ................................................. 7 Enter a Departure ......................................................... 9 Enter En Route Waypoints .................................
KSN 765/770 Integrated Communication Navigation Display Pilot QRG Blank Page Page 2 D200909000026 REV 2 Jun 2014
FLIGHT MANAGEMENT SYSTEM (FMS) OVERVIEW To access the FMS function, push the FMS key. When the FMS function is first accessed, the FMS page 1/3 is displayed and the Home window always has focus ( FMS HOME will briefly display). TIP Pushing the FMS key always returns you to the FMS home window.
Flight Management System (FMS) Overview KSN 765/770 Integrated Communication Navigation Display Pilot QRG Blank Page Page 4 D200909000026 REV 2 Jun 2014
KSN 765/770 Integrated Communication Navigation Display Pilot QRG ENTER A FLIGHT PLAN The following pages describe how to enter a flight plan. Enter a Departure Airport 1. Push the joystick knob or push the waypoint list window twice to move the focus to the waypoint list window. 2. Push the EDIT bezel softkey. All flight plan editing must be done in this mode. EDIT mode is noted by Flight Plan Edit as the displayed mode in the upper-left portion of the FMS HOME Window.
KSN 765/770 Integrated Communication Navigation Display Pilot QRG Enter a Flight Plan 3. Push the Insert ( INS ) bezel softkey. The INSERT NEW WAYPOINT pop-up window is displayed. 4. Select the departure airport from the list. The pop-up window is removed and the departure airport is inserted into the flight plan.
KSN 765/770 Integrated Communication Navigation Display Pilot QRG Enter an Arrival Airport 1. Push the joystick knob or push the waypoint list window twice to move the focus to the waypoint list window. 2. Push the EDIT bezel softkey. All flight plan editing must be done in this mode. EDIT mode is noted by Flight Plan Edit as the displayed mode in the upper-left portion of the FMS HOME Window. EDIT Mode 3. Push the Insert ( INS ) bezel softkey, then select the arrival airport.
KSN 765/770 Integrated Communication Navigation Display Pilot QRG 4. If the arrival airport isn’t in the NEAREST AIRPORTS list, enter the airport identifier by one of two ways: • Toggle the joystick up to select the airport Identifier field, then toggle and scroll the joystick knob to enter one character of the identifier at a time. • Push the Airport Identifier field twice, then use the pop-up QWERTY keypad to enter the airport identifier. 5. Use the keypad to enter the arrival airport, then push OK .
KSN 765/770 Integrated Communication Navigation Display Pilot QRG Enter a Departure 1. Push the Procedure ( PROC ) bezel softkey. NOTE: The PROC bezel softkey label is displayed when the FMS HOME window or Waypoint List window has focus. 2. Push the Departure ( DEP ) bezel softkey to enter a departure procedure.
KSN 765/770 Integrated Communication Navigation Display Pilot QRG 3. Push the joystick knob or push the touchscreen twice to select the desired runway for departure. Select a Runway 4. Push the joystick knob or push the touchscreen twice to select the desired departure procedure.
KSN 765/770 Integrated Communication Navigation Display Pilot QRG 5. Push the joystick knob or push the touchscreen twice to select the desired departure procedure transition. The departure procedure is then entered into the waypoint list.
KSN 765/770 Integrated Communication Navigation Display Pilot QRG Enter En Route Waypoints When the flight plan edit function is active (the EDIT softkey is active), the waypoint list header and touchscreen change to permit the pilot to select ( SELECT ) and insert ( INS ) waypoints. Touching the left side of the waypoint list window selects individual waypoints. Touching the right side defines the location where the pilot wants to insert a waypoint. 1.
KSN 765/770 Integrated Communication Navigation Display Pilot QRG 2. Push the Insert ( INS ) bezel softkey. The INSERT NEW WAYPOINT pop-up window is displayed. 3. Push the APT bezel softkey or use the touchscreen button to choose the nearest airport, NAVAIDs, or intersections. 4. Rotate the joystick knob to scroll through the available waypoints, then push the joystick knob or push the touchscreen twice to select the desired waypoint.
KSN 765/770 Integrated Communication Navigation Display Pilot QRG 5. If the desired waypoint isn’t listed, the waypoint can be manually entered. Push the waypoint identifier field at the top of the display twice to show the QWERTY popup window, key in the desired waypoint, then push OK . QWERTY Pop-Up Window Enter Waypoints via Airway NOTE: Before an airway can be entered, the beginning and ending waypoints of the airway must already be contained in the flight plan. 1.
KSN 765/770 Integrated Communication Navigation Display Pilot QRG 3. Push the Airway ( AWY ) bezel softkey. The INSERT WAYPOINTS VIA AIRWAY pop-up window is displayed.
KSN 765/770 Integrated Communication Navigation Display Pilot QRG 4. Enter the airway name and then push OK . The FMS message AIRWAY ADDED is displayed when an airway is successfully added. Enter an Arrival 1. Push the FMS key to access the FMS function. 2. Push the Procedure ( PROC ) bezel softkey.
KSN 765/770 Integrated Communication Navigation Display Pilot QRG 3. Push the Arrival ( ARR ) bezel softkey.
KSN 765/770 Integrated Communication Navigation Display Pilot QRG 4. Rotate the joystick knob to scroll through the available arrivals and transitions, then push the joystick knob or push the touchscreen twice to select the desired arrival and then the desired transition.
KSN 765/770 Integrated Communication Navigation Display Pilot QRG EDIT A FLIGHT PLAN The following pages describe how to edit a flight plan. Connect a WPT Disconnect A disconnect is created whenever a defined path does not exist between two waypoints. For example, adding a procedure may result in a disconnect in the flight plan. When a disconnect exists in the flight plan, WPT DISCONNECT is displayed in the waypoint list.
KSN 765/770 Integrated Communication Navigation Display Pilot QRG 2. Push EDIT , CONN . Edit a Flight Plan 3. Push OK to select the CONFIRM CONN prompt.
KSN 765/770 Integrated Communication Navigation Display Pilot QRG Change a Waypoint 1. Push the waypoint twice to highlight the waypoint in the Waypoint List window. 2. Push EDIT , CHNG .
KSN 765/770 Integrated Communication Navigation Display Pilot QRG 3. Select a waypoint by: • Pushing the APT , NAV , or INT buttons and scrolling with the joystick knob, or • Pushing the identifier field twice and entering the identifier with the pop-up QWERTY keyboard. 4. Push OK .
KSN 765/770 Integrated Communication Navigation Display Pilot QRG Delete a Waypoint 1. Push the waypoint twice to highlight the waypoint in the Waypoint List window. 2. Push EDIT , DEL .
KSN 765/770 Integrated Communication Navigation Display Pilot QRG 3. Push OK to select the CONFIRM DEL prompt.
KSN 765/770 Integrated Communication Navigation Display Pilot QRG Delete an Entire Flight Plan 1. Push the FMS key to access the FMS function. 2. Push Clear ( CLR ).
KSN 765/770 Integrated Communication Navigation Display Pilot QRG The CAUTION PRESS OK TO CLEAR ENTIRE FLIGHT PLAN prompt is displayed. 3. Push OK to clear the entire flight plan.
KSN 765/770 Integrated Communication Navigation Display Pilot QRG Activate a Flight Plan Leg If you are trying to join a flight plan leg that is not displayed in magenta, complete the following procedure: 1. While in Edit mode, push the first waypoint of the desired leg in the Waypoint List window twice to highlight it. 2. Push Activate ( ACTV ). The selected waypoint becomes the active FROM waypoint.
KSN 765/770 Integrated Communication Navigation Display Pilot QRG Blank Page Page 28 D200909000026 REV 2 Jun 2014
KSN 765/770 Integrated Communication Navigation Display Pilot QRG The following pages describe how to execute a Direct-To. Direct-To a Waypoint in the Flight Plan The following procedure describes how to perform a Direct-To a waypoint in the flight plan. 1. Push the Direct-To key ( D ). The DIRECT TO pop-up window is displayed. 2. Use the joystick knob or touchscreen to select the desired flight plan waypoint, then push the joystick knob or push the touchscreen twice to perform the Direct-To.
Execute a Direct-To KSN 765/770 Integrated Communication Navigation Display Pilot QRG Direct-To a Waypoint Not in the Flight Plan The following procedure describes how to perform a Direct-To a waypoint that is not in the flight plan: 1. Push the Direct-To key ( D ). The DIRECT TO pop-up window is displayed. 2. Push the FPL bezel softkey to toggle through the nearest flight plan waypoints, previous waypoints, airports, NAVAIDs, and intersections.
KSN 765/770 Integrated Communication Navigation Display Pilot QRG When a Direct-To is performed to a waypoint not contained in the active flight plan (PREV, APT, NAV, INT, or USER waypoint), the remaining waypoints in the active flight plan become grayed out and the original flight plan is suspended until the new Direct-To a waypoint not in the flight plane is undone.
KSN 765/770 Integrated Communication Navigation Display Pilot QRG Blank Page Page 32 D200909000026 REV 2 Jun 2014
KSN 765/770 Integrated Communication Navigation Display Pilot QRG ACCOMPLISH A HOLDING PATTERN The following pages describe how to accomplish a holding pattern. Create a Hold A hold can be created manually by the pilot. A hold can be accomplished at a waypoint in the current flight plan. The following procedure describes how to create a hold at a waypoint. 1. Use the joystick knob or touchscreen to highlight the desired hold waypoint.
KSN 765/770 Integrated Communication Navigation Display Pilot QRG Accomplish a Holding Pattern 2. Push the Procedure ( PROC ) bezel softkey. 3. Push the HOLD bezel softkey.
KSN 765/770 Integrated Communication Navigation Display Pilot QRG 4. Push the ADD bezel softkey. The Modify Parameters window is then displayed. Modify Parameters Window NOTE: When a hold is published at a selected waypoint, the FMS uses information contained in the NAV database to pre-populate the hold parameters with the published hold.
KSN 765/770 Integrated Communication Navigation Display Pilot QRG 5. Select the desired parameter field by moving the joystick up or down or by pushing the touchscreen on the desired field. 6. Toggle the joystick knob to select and modify hold parameters as desired. NOTE: When published hold specifications are modified, the PUB bezel softkey label is displayed. Pushing the PUB bezel softkey populates fields with published values. 7. Push the OK bezel softkey when the hold parameters are set as desired.
KSN 765/770 Integrated Communication Navigation Display Pilot QRG Modify or Delete an Existing Hold To edit or delete a hold that has already been inserted into a flight plan, complete the following procedure: 1. Use the joystick knob or touchscreen to highlight the waypoint in the FMS Waypoint List window. 2. Push the Procedure ( PROC ) bezel softkey. 3. Push the HOLD bezel softkey. 4. If modifying the hold (or reviewing an existing hold), push the Modify ( MOD ) bezel softkey.
KSN 765/770 Integrated Communication Navigation Display Pilot QRG 5. Modify the parameters as desired, then push the OK bezel softkey.
KSN 765/770 Integrated Communication Navigation Display Pilot QRG 6. If deleting the hold, push the Delete ( DEL ) bezel softkey. The CONFIRM DEL prompt is displayed. CONFIRM DEL Prompt 7. Push the OK bezel softkey to delete the hold.
KSN 765/770 Integrated Communication Navigation Display Pilot QRG Blank Page Page 40 D200909000026 REV 2 Jun 2014
KSN 765/770 Integrated Communication Navigation Display Pilot QRG EXECUTE AN APPROACH PROCEDURE The following pages describe how to execute an approach procedure. Enter and Fly an Approach An Approach procedure can be executed when the last waypoint in the flight plan is an airport. 1. Push the FMS key to access the FMS function. 2. Push the Procedure ( PROC ) bezel softkey.
KSN 765/770 Integrated Communication Navigation Display Pilot QRG Execute an Approach Procedure 3. Push the Approach ( APPR ) bezel softkey.
KSN 765/770 Integrated Communication Navigation Display Pilot QRG 4. Rotate the joystick knob to scroll through the available approaches and transitions, then push the joystick knob or push the touchscreen twice to select the desired approach and then the desired transition. Select Approach and Transition 5. Depending on the type of approach selected, the following will occur: • VHF Ground-Based Approaches (e.g.
KSN 765/770 Integrated Communication Navigation Display Pilot QRG NAV Radio Autotune If configured, the KSN 770 will autotune the NAV radios for ILS and localizer approaches only. When an ILS or localizer approach is inserted into the flight plan, the standby NAV frequency is tuned to the ILS or localizer frequency.
KSN 765/770 Integrated Communication Navigation Display Pilot QRG Vectors to Final (VTF) The VTF selection provides a final approach extension from the FAWP that can be used to orient the flight crew while being vectored to the final approach. Vectors To Final (VTF) is indicated in the flight plan list as FLY VTF . Vectors to Final The VTF bezel softkey label is displayed on the left-side of the waypoint list when the waypoint list or home window is selected and the VTF approach transition is available.
KSN 765/770 Integrated Communication Navigation Display Pilot QRG Change, Delete, or Approach Procedure Reinsert an Entered In order to change, delete, or reinsert an entered approach procedure, complete the following procedure: 1. Push the FMS key to access the FMS function. 2. Push the Procedure ( PROC ) bezel softkey. 3. Push the Approach ( APPR ) bezel softkey. The Select APPROACH for window is displayed.
KSN 765/770 Integrated Communication Navigation Display Pilot QRG 4. From this window, the approach can be reinserted, deleted, or the type of approach can be changed (to the same runway only). • To reinsert the approach, rotate the joystick knob or push the touchscreen to select Reinsert . Push the joystick knob or push the touchscreen twice to select reinsert. • To delete the approach, rotate the joystick knob or push the touchscreen to select Delete Active Approach .
KSN 765/770 Integrated Communication Navigation Display Pilot QRG Blank Page Page 48 D200909000026 REV 2 Jun 2014
EXECUTE A MISSED APPROACH The missed approach procedure begins at the Missed Approach Waypoint (MAWP), and is separated from the approach by a Missed Approach header within the waypoint list. Missed Approach Header When crossing the MAWP and the missed approach is not initiated prior to the MAWP, the FMS enters Suspend. The CDI will go to FROM and the outbound course is the same as the inbound course. The flight plan is suspended until the missed approach is selected.
Execute a Missed Approach KSN 765/770 Integrated Communication Navigation Display Pilot QRG Execute a Missed Approach Before or After Reaching the MAWP A missed approach can be executed in two ways: before reaching the MAWP or after reaching the MAWP: 1. To execute a missed approach before reaching the MAWP, push the MA bezel softkey. The MA bezel softkey label is only displayed when either the FMS HOME window or waypoint list window has focus.
KSN 765/770 Integrated Communication Navigation Display Pilot QRG Pushing the CLEAR touchscreen button removes the pop-up window without activating the missed approach procedure. TIP The missed approach can be activated later by pushing the FMS key and then the MA bezel softkey. When the missed approach is activated, TERMINAL MISSED APR is displayed in the FMS Phase of Flight window.
KSN 765/770 Integrated Communication Navigation Display Pilot QRG Blank Page Page 52 D200909000026 REV 2 Jun 2014
KSN 765/770 Integrated Communication Navigation Display Pilot QRG GLOSSARY, ACRONYMS, AND ABBREVIATIONS BEZEL SOFTKEY – A key (button) on the bezel surrounding the KSN display that is used to perform multiple functions, depending on the Bezel Softkey Label. BEZEL SOFTKEY LABEL – A label on the KSN display immediately adjacent to a bezel softkey that identifies the functions of the softkey (button). The label function changes depending on which window on the display is being controlled.
KSN 765/770 Integrated Communication Navigation Display Pilot QRG FOCUS – The window on the display bound in magenta. The bezel softkeys control functions on the focused window. GPS CDI – A button on the screen that indicates that the GPS is driving the CDI. The button alternates with the VLOC CDI. IAP – Instrument Approach Procedure. JOYSTICK KNOB – Contains a rotation function, push function, and toggle function for panning, scrolling, data input, and selecting items.
KSN 765/770 Integrated Communication Navigation Display Pilot QRG SOFTKEY – A key that performs a function based on the screen label adjacent to it. SUSPEND – When the aircraft crosses a waypoint and there is no next leg of the flight plan. TOUCHSCREEN BUTTON touchscreen display. – A button on the VIEW – A certain section on an MFD page framed in magenta. Pushing the VIEW key changes the section framed in magenta. The VIEW key has no function in the FMS function. VTF – Vectors to final.
KSN 765/770 Integrated Communication Navigation Display Pilot QRG Blank Page Page 56 D200909000026 REV 2 Jun 2014
KSN 765/770 Integrated Communication Navigation Display Pilot QRG INDEX Accomplish a Holding Pattern, 33 Activate, 27 Activate a Flight Plan Leg, 27 Add bezel softkey, 35 Airport Identifier field, 8 AIRWAY ADDED FMS message, 16 Airway bezel softkey, 15 Approach bezel softkey, 42, 46 Approach procedure, 41 APT bezel softkey, 13 Arrival airport, 7, 8 Arrival and Transition, 18 Arrival bezel softkey, 17 D200909000026 REV 2 Jun 2014 EDIT bezel softkey, 5, 7 Edit a Flight Plan, 19 Edit mode, 27 EDIT mode, 5,
KSN 765/770 Integrated Communication Navigation Display Pilot QRG Enter Waypoints via Airway, 14 Execute a Direct-To, 29 Execute a Missed Approach, 49 Execute a Missed Approach Before or After Reaching the MAWP, 50 Execute an Approach Procedure, 41 Index FAWP, 43, 44, 45 Final Approach Waypoint, 43 Flight Management System, 3 Flight plan, 5, 6, 7, 8, 12, 14, 19, 26, 27, 29, 30, 31, 33, 36, 37, 41, 44, 45, 49 Flight Plan Edit, 5, 7, 14 Flight plan edit function, 12 Flight plan edit mode, 12 FLY VTF, 45 FM
KSN 765/770 Integrated Communication Navigation Display Pilot QRG NAV, 22, 31, 35, 43, 44 NAV database, 35 NAV Radio Autotune, 44 NAVAIDs, 13, 30 NEAREST AIRPORTS list, 8 OK bezel softkey, 36, 38, 39 Phase of Flight window, 51 Procedure bezel softkey, 9, 16, 34, 37, 41, 46 PUB bezel softkey, 36 QWERTY keyboard, 22 QWERTY Keypad, 8 QWERTY pop-up window, 14 Reinsert, 46, 47 Select APPROACH for window, 46 Select waypoints, 12 D200909000026 REV 2 Jun 2014 Start and end waypoints, 14 Suspend, 45, 49 TERMINAL
KSN 765/770 Integrated Communication Navigation Display Pilot QRG Blank Page Page 60 D200909000026 REV 2 Jun 2014
