Owner`s manual

PRIORITY MODE B
In priority mode B the priority mode is fixed in programming and
indicated by the PR annunciator when the priority channel is selected. Priority
operation during scanning is the same as with Priority mode A, except that
the priority channel is pre-programmed, not the selected channel.
However, with any channel selected other than the fixed priority channel with
SCN off and PRI on, the receiver checks the priority channel while receiving
on the selected channel. If activity is detected on the priority channel, the
receiver switches to receive the priority channel for the duration of the
transmission, then returns to the selected channel. The radio transmits on
the knob-selected channel while operating in priority mode B.
PRIORITY MODE C
In priority mode C the priority channel is pre-programmed. This channel
is displayed anytime PRI is on, no matter where the Channel Select knob is
set. Priority operation during scan operation is the same as with Priority
Mode A, except that the priority channel is preprogrammed, not the
selected channel. In priority mode C the transmitter always transmits on
the priority channel when PRI is on.
PRIORITY MODE D
Priority mode D operates exactly like priority mode C. However when PRI is
on, the channel name or number displayed is the knob-selected channel,
not the fixed priority channel.
12 RELM/BK Radio