Instruction manual

PRIORITY SCAN

Functions 2 and 3 are used to define Priority Scan operation. There

are three modes of Priority Scan available. They are described in

greater detail in the Owner’s Manual and Service Manual.

PRG

-0

$33ljrj

-----

---.-.--

----____

PRI KEY LOCKOUT

Priority Mode A

The Priority Channel

follows the position of the Channel Selector

knob.

Priority Mode B

The Priority Channel is

fixed. You will transmit on the channel

selected by the Channel Selector knob.

Priority Mode

The Priority Channel is

fixed. When the

PRI

toggle switch is on,

the display will show the Priority Channel,

and you will transmit on the Priority Channel

regardless of the Channel Selector knob

setting.

Priority Mode D

Same as Priority Mode

C, except that when the

PRI

toggle switch

is on, the display will show the channel

selected by the Channel Selector knob.

When function 4 is enabled (flashing) the

[PRI]

key is locked out in the operating

mode. The user will not be able to change

the designation of the Priority Channel.

When function 4 is disabled (steady) the

user will be able to change the channel

that is designated as Priority Channel.

See ‘Change the Priority Channel” in the

Owner’s Manual.

BENDIX/KING