Instruction manual

Press the

[PRI]

key. This will increment

the ID number one digit to

126.

NOTE: Any new number can be entered

at this point by pressing the

[CLR]

key

and using the digit keys to enter the

new number.

Press the

[*]

key. Connect the cable

to the second clone and download by

pressing

[FCN].

Any number of radios can be coded with different or sequential ID

numbers using this technique.

The ID number in the permanent

memory of the Master radio will remain unchanged as 100.

SCAN LIST AND PRIORITY CHANNEL CLONING

When a Master radio downloads to a clone, the Scan List and Priority

Channel designations are also transferred to the clone.

This includes

Priority Mode and any lockout functions.

To program a clone with a specific Priority Mode, Priority Channel, and

Scan List along with the respective lockout functions (if desired), the

Master radio must first be programmed with these parameters. The

lockout functions cannot be held in temporary memory. See “Priority

Scan” on page 8 and “Busy Channel Operation” on page IO. See

Change the Scan List” and “Change the Priority Channel” in the

Owner’s manual.

Keyboard Programming