Instruction manual

\\\

I///

,~fFJ

\\\

////I\\\\

10. Press the

[FCN]

key. The program in

the Master will download to the clone.

The clone will send back the program

to the Master to verify successful

cloning.

11. If the download was successful, the

Master radio will resume flashing

PROG. Turn off the clone radio.

Disconnect the cable. Normal radio

operation will occur the next time the

clone radio is turned on.

12. If the download was not successful

the Master radio will flash FAIL,

followed by continuous beeps. Failure

to download the Master program can

be due to:

A. Incorrect radio types.

B. Improper connection.

Failure to power up radio.

Clone set in programming mode.

NOTE: To stop FAIL mode, press the

[CLR]

key, turn off the

radios, and start again at Step 1

GROUP CLONING

Cloning radios equipped with more than 14 channels (more than

one group) can only be accomplished group by group. Settings for

any group in a Master radio can be downloaded to any group in the

clone radio. To perform group cloning:

1. With the Master radio in normal

operation mode, press the [#] key

followed by number keys to select the

group to be downloaded.

Set the clone radio to the group that is

to receive the download, using the

same method as in step 1

Follow thecloning instructionson page

Keyboard Programming