Instruction manual

ALPHANUMERIC LABEL
To enter a new value, press the [CLR] key
to reset the display to 0.0. Press the
number keys to enter a Tone Code Guard
value. See “Tone Code Guard Values” on
page 24.
To enter Digital Code Guard, first press
the
[CLR] key, then the [#] key, causing
the letter
D to appear followed by three
zeros Enter the desired digital code using
keys 0 thru
7 (keys 8 & 9 do not respond).
See “Digital Code Guard Values” on page
25
.
Pressing the [PRI] key after the three digit
code has been entered allows the digital
code to be inverted. When the displayed
value is correct, press the
[ENT] key to
store the Code Guard and automatically
advance to the next value.
After the transmit Code Guard is set, the
LCD will display the channel label. If this
label is correct press the
[FCN] key to
proceed to the entry point.
To enter a new channel label, follow the
instructions under “Group Labels”on page
15
.
REVIEW CHANNEL SETTINGS
After the channel label is set, the display
will return to the Channel 1 starting point.
To review the frequencies, Code Guard
values, and label in Channel 1, press the
[FCN] key repeatedly.
To view and change thevaluesfor another
channel, press the number keys for that
channel, or press the
[PRI] key to move up
to the next channel. Each channel can
then be programmed using the same steps
described for Channel
1.
18
BENDIX/KING