Instruction manual

BACKLIGHT DURATION
Display backlighting is available only with
Alphanumeric displays.
After Group Three functions, the LCD
displays the current backlight duration
setting. Available settings are
LITE OFF,
1 SEC ON, one second increments up to
6
SEC ON, and LITE ON.
If no change is needed, press the [FCN]
key to advance to the next section.
Press the [CLR] key to set backlight
duration to zero and display LITE OFF.
Press the [PRI] key to increase backlight
duration by 1 second increments from
LITE OFF, to 1 SEC ON, 2,3,4,5,6 SEC
ON,
LITE ON (illumination remains on
constantly) then back to LITE OFF.
NOTE: The backlight illuminates for the
duration of the new setting. For
example, if you press the [PRI] key to
change the setting from 2
SEC ON to
3
SEC ON the backlight immediately
illuminates for three seconds.
NOTE: Excessive battery drain will result
if
LITE ON is set and used for extended
periods of time.
Press the
[ENT] key to store changes and
advance to the next function.
Press the
[FCN] key to advance to the
next function without storing changes.
14 BENDIX/KING