Owner's manual

TCAS II Pilot’s Guide
Effective Date 2/04006-08499-0000 Rev 7
75
After the sequential lamp test, the red and green climb/descend lights
display a fixed test command throughout the remainder of the system
test.
Fixed Test Command
At the conclusion of a successful Self-Test, a synthesized voice
announces:
“TCAS SYSTEM TEST OK”
RA/VSI AND TA/VSI LAMP TESTS
RA/VSI Lamp Tests
If the aircraft wiring includes a lamp test function, the RA/VSI sequen-
tial lamp test can be observed by activating the Master Lamp Test
Switch. The test will continue as long as the switch is held in the test
position.
Appendix