Users Guide Owner's manual

Honeywell Bendix/King AV8OR Ace User’s Guide

D200904000003 Appendix

Rev 3 Mar 2012 Page 6-15

WxWorx XM Weather Receiver Bluetooth Setup

To configure the AV8OR ACE to receive weather data from the

Bluetooth version of the WxWorx XM Weather Receiver, perform the

following steps:

Setup the WxWorx receiver in the Device and Port Setup page as

follows:

1. On the Main Menu page, tap the soft key to start the

Aviation mode navigation program.

2. From the Map page, tap on the MAIN MENU soft key to go to

the Aviation Main Menu.

3. Tap the soft key to open the System Setup Menu.

4. Highlight the Device Setup option and tap the SELECT soft key

to show the Device and Port Setup page.

5. Set the Weather Port to BlueTooth.

NOTE: The AV8OR can have up to 4 BlueTooth connections at

one time.

6. Set the Weather Type to “WxWorx”. When finished the Device

and Port Setup page should look like the setup options shown in

the figure below.

Figure 6-6: WxWorx Bluetooth Receiver Setup

Establish a paired connection between the WxWorx XM receiver and

the AV8OR.as follows: