Users Guide Owner's manual

Honeywell Bendix/King AV8OR Ace User’s Guide

D200904000003 Aviation Mode Operation

Rev 3 Mar 2012 Page 2-199

Tap on the OK soft key to accept the new ident name or tap the

CANCEL soft key to cancel the ident name change.

Figure 2-200: Demo Mode Setup Ident Details

• Initial Position: Determines the latitude and longitude of where

the simulator flight starts. The user can input the latitude and

longitude.

• Altitude: The simulators altitude can be set to any altitude

between 0 and 99900 feet in 100-foot increments or between 0

and 30500 meters in 100-meter increments.

• Groundspeed: The simulators speed can be set to any value

between 0 and 999 in any of the selected speed units.

• Track: Set the initial track from the initial WPT. Track can be set

to any value between 0 and 359 degrees.

When all the parameters have been entered tap the RESTART

DEMO soft key to restart the simulator and return to the System

Setup Menu.

DEVICE SETUP PAGE

This

pag

e lets the user to configure the external interfaces (GPS

Receiver, Flight Plan Device, and WX Receiver) to the unit.