Users Guide Owner's manual

Honeywell Bendix/King AV8OR Ace User’s Guide
D200904000003 Aviation Mode Operation
Rev 3 Mar 2012 Page 2-197
© Honeywell International Inc. Do not copy without express permission of Honeywell
Figure 2-197: Flight Plan Data Setup
The ‘Flight Plan Data Column Setup’ table displays the current
column headings for the flight plan data display. The ‘Select Data
Column Type’ table defines the column headings that are available.
Tap on the ‘Flight Plan Data Column Setup’ table to highlight the
desired configurable column, the corresponding column type is
displayed with a white border box in the ‘Select Data Column Type’
table. Move the highlighted box to the desired new column heading
the heading in the above table changes as the lower table highlight
is moved.
Tap the RESET COLUMNS soft key to set the column heading to
their factory defaults.
DEMO MODE SETUP
The da
ta in the Demo Mode Setup window is used to control the
starting position, altitude, speed, and initial track of the simulator.
You must select DEMO MODE on initial turn on to show this menu
selection See the Demo Mode
sec
tion on page 2-4 for instructions
on how to enable Demo Mode.