Users Guide Owner's manual

Honeywell Bendix/King AV8OR Ace User’s Guide

Aviation Mode Operation D200904000003

Page 2-190 Rev 3 Mar 2012

To change values, double tap the highlighted value item or tap once

on the item to highlight it and then tap on the Edit soft key and a pop

up window shows the possible values that can be set. Highlight the

desired value and double tap it or tap the Select soft key to finish the

change. Tap the SAVE & EXIT soft key to return to the previous

menu.

NAVIGATION SETUP

The Navi

gati

on Setup page permits the navigation setup options to

be configured, as shown in the figure below.

Figure 2-194: Navigation Setup

Tap the SAVE & EXIT soft key to save any changes. Tap the

RESET VALUES soft key to restore most of the values to their

factory initial settings.

Double tap on an option or tap once on an option to highlight it and

then tap on the EDIT soft key to display a pop up window to show

the possible values that can be set. Double tap the highlighted value

or highlight the value and tap on the SELECT soft key to change the

item’s values.

• AutoNav: Enable the AutoNav function to allow AV8OR ACE to

automatically switch between the external and internal GPS

sources when there is more than one source. The AutoNav