Users Guide Owner's manual

Honeywell Bendix/King AV8OR Ace User’s Guide
D200904000003 Aviation Mode Operation
Rev 3 Mar 2012 Page 2-187
© Honeywell International Inc. Do not copy without express permission of Honeywell
The Point, Line, Airspace and Overlay pages have the following
four columns:
• Feature – Feature Description
• Icon/Style – A graphical representation of the Feature
• Max – The maximum range that the feature will show on
the map. If the range on the selected map page is set
higher than the Max setting, the feature does not show
on the map page.
• Label - The maximum range that the label for the feature
will show on the map. If the range on the selected map
page is set higher than the Label setting, the label does
not show on the map page.
The ALL MAPS soft key copies the settings of the features on
the current tab to all available maps.
The RESET VALUES soft key resets the options on the page to
the default value for each feature.
The CHANGE MAP soft key displays the list of map layers as
shown in the figure below. Select the desired map or chart and
then tap the SELECT soft key to select that layer and return to
the Map Features page.
Figure 2-189: Map System Setup -- Select Map Layer