Users Guide Owner's manual

Honeywell Bendix/King AV8OR Ace User’s Guide

D200904000003 Aviation Mode Operation

Rev 3 Mar 2012 Page 2-63

When flying on a course using the Direct-To function, if the

aircraft gets away from the course line on the map, the pilot can

easily create a new course line to the destination from the aircraft’s

present position by using the steps that follow:

Tap the hard key from the Map page to display the virtual

keyboard. The active Direct-To destination will already be filled in on

the keyboard.

Figure 2-56: Re-center aircraft – Step 1

Tap the Enter soft key to use the entered WPT and re-center the

course line from the aircraft’s present position to the destination.

Bypass a WPT with a flight plan active

Whe

a flight plan is active, the pilot may want to bypass one of the

WPTs in the flight plan and go direct to one of the other WPTs. Use

the steps that follow to bypass a WPT.

1. The active course shows as a magenta line on the Map.

2. Tap on the hard key to display the Active Flight Plan page.