Product specifications

8
ISOLATION VALVE - ALCOHOL EVAPORATOR - GOVERNORS
PRESSURE RELIEF (SAFETY) VALVES
FLEETCRAFT GOVERNOR
Features ball check design with
filtered ports. Can be mounted
at a remote location or directly
to compressor. Preset to open
at 120 PSI, close at 100 PSI.
Can be Adjusted. Includes
4 pipe plugs, mounting
gasket and instructions.
New, outright.
Part No. FC18530
SAFETY VALVE
Protects against
excessive pressure in air system.
Installs in the supply reservoir.
Factory set at 150 PSI.
Can be adjusted.
Automatically closes
after excess pressure is released
to atmosphere. 1/4" PT.
(A) Part No. 205105N
(B) Part No. 284142N
(B) Part No. 285849N (175 psi)
PRESSURE
RELIEF VALVE
Brass body and
stainless steel
spring. Factory
set at 150 PSI.
1/4"NPTF
Part No. 1031200
FLEETCRAFT AIR DRYER AND PARTS
ALCOHOL EVAPORATOR
An automatic vaporizing device for
keeping air lines and air reservoir
free of ice. Bracket Mount.
•Easy to install
•Pressure protected
•Holds 40 oz. of methyl alcohol.
•1/2" NPTF Ports
Part No. A72420
Bendix D-2 Governor
Remanufactured.
No Core. For mounting
to the compressor or
mounted remotely.
Pressure range
100 - 120 PSI.
5" overall height.
1/8" NPT ports.
Sold outright.
Part No. OR275491X
Part No. OR284358X
(105-125 PSI, waterproof cover)
Part No. 275491N (NEW)
ISOLATION VALVE
(Turbo Cut-Off Valve)
Used with air dryers not equipped with
this feature. Allows use of air dryer
on turbo charged engines without
affecting engine performance.
Installs directly (1/2"-14 NPTF) to air
line inlet port of air dryer.
Part No. KN23500
Port A: To air dryer inlet port
Port B: To pipe plug
Port C: To compressor discharge
Port D: To governor unloader
Height: 3.18"
Haldex Piston-Type Governor
Operates in conjunction
with the compressor
unloading mechanism.
Automatically controls
the air pressure in the
air supply system between
the desired predetermined
maximum and minimum
pressures. Direct
compressor or remote
mount. 1/8-27 NPT ports.
Part No. KN18530 (NEW)
Part No.
236577N
Governor
Gasket
105 -
125
PSI.
Air Dryer Cartridge
Part No. FC950011
Fleetcraft Desiccant
Cartridge Kit
For Turbo-2000 &
HD-2000 Air Dryer
Part No. FCT224
Fleetcraft Air Dryer
With integral turbo
cut-off valve, no
need for purge tank.
Includes mounting
bracket.
Part No. FC955205
ST-3
SAFETY
VALVE
75PSI
Pressure setting,
1/4" port.
Part No. 285850
Safety Valve Kit ST-4
The ST-4 Safety Valve
is installed in the extra
compressor discharge
port, if available, or the
discharge line to prevent
compressor damage in the
event of discharge line
blockage. Because of
this a standard
safety valve may not
be used. 250 psi.
Part No. 131081
1/2-14 NPT
Part No. 801116
7/8-14. UNF-2A
L
(B)
L=2.56"
L
(A)
L=3.25"