Product specifications

2
BENDIX COMPRESSORS AND PARTS
UNLOADER KIT
Kit contains parts to install
3 piece unloader plungers in
Tu-Flo compressors.
Part No. 279615N
AIR STRAINER
For TF-400, 500,
501, 600, and 700
Bendix compressors
Part No. 278500N
Contents:------------->
(Air Filter=Part No. PA1704)
(1) 279905
Mounting Baffle
(1) 243009
Filter Element
(PA1704)
(1) 279903
Cover
(1) 243430
Gasket
(2) 243411
Cap Screw
(2) 237648
Lock Washer
ST-4™ Safety Valve
Part No. 131081
250 psi.
WHY A BENDIX REMANUFACTURED COMPRESSOR?
•All components are inspected and then replaced or remanufactured to the highest Bendix OEM manufacturing and product
specifications, long the industry standard.
•All Bendix remanufactured compressors meet or exceed OE manufacturing functional, end-of-line test specifications.
•Bendix discards and replaces all wear components – o-rings, gaskets,piston rings, bearing inserts, sleeve bearings,
unloader springs, seals, studs, lock washers, pipe fittings, inlet and discharge valves, inlet and discharge springs, wrist
pin plugs and safety valves – with new components in all remanufactured compressors.
•During the remanufacturing process, genuine Bendix compressors are upgraded with the latest manufacturing methods,
technologies and product enhancements, often making our remanufactured product better than the original.
•These upgrades are done even if the replaced compressor did not have the enhancement when new.
Look for our Governors on page 8!
Tu-Flo
®
550 for Detroit Diesel
Series 60 non-EGR
(69 tooth gear w/21 tooth spline)
Part No. 5004188X
Tu-Flo
®
750 for
Detroit Diesel 3306
Series 60 non-EGR & Series 50
(69 tooth gear w/21 tooth spline)
Part No. 5004187X
Tu-Flo
®
550 for Detroit Diesel
Series 60 non-EGR
(21 tooth spline)
Part No. 107622X
Tu-Flo
®
750 for Detroit Diesel
Series 60 non-EGR & Series 50
(21 tooth spline)
Part No. 107623X
Tu-Flo
®
550 for
International V8
pre-2004, T444E
Part No. 107514X
Tu-Flo
®
550 for International I-6
pre-2004 DT466, HT530
Part No. 5004613X
NPT
Ports
NPT
Ports
Tu-Flo
®
550 for Mack Extended
(Pre-1997)(*Head contoured for
special clearance application.)
Part No. *108866X
Part No. 5002865X
Tu-Flo
®
750 for Mack Extended
(Pre-1997)(*Head contoured for
special clearance application.)
Part No. *108869X
Part No. 5002868X
Tu-Flo
®
550 for Volvo
Part No. 108937X
Tu-Flo
®
750 for Volvo
Part No. 108935X
Tu-Flo
®
750 for International I-6
pre-2004, HT530
Part No. 5004614X