Manualshelf

User's Manual

ManualsBrandsBENDIX ManualsCompressors And GovernorsBENDIX TCH-001-060
1234
Bulletin No: Page: 3 of
TCH-001-060
4
ESS INSTALLATION
Use the entire contents of this kit and only use the lubricant provided. Proper lubrication is extremely important
in the installation and the entire tube of lubricant must be used. Use the illustrations provided with each
step as a guide.
1. Lubricate the balance piston as shown. Be sure to thoroughly lubricate the o-ring groove.
2. Lubricate the balance piston o-ring and install it on the balance piston. Be sure to not twist or tear the
o-ring during installation.
3. Lubricate the entire ESS piston assembly as shown below.
4. Insert the spring into the ESS piston assembly housing.
Balance Piston
i
Balance Piston
Properly Lubricated
Balance Piston O-ring
O-ring Installed on the
Balance Piston
ESS Piston Assembly
Properly Lubricated
ESS Piston Assembly
Spring
ESS Piston Assembly
ESS Piston Assembly
with Spring