User guide
Table Of Contents
- General Information
- RP1210 adapters
- PC hardware requirements
- Technical Assistance
- Installing Bendix® ACom® Diagnostics
- Using Bendix® ACom® Diagnostics
- Bendix® ACom® Diagnostics 6.5 Windows ECU Status Screen
- Diagnostic Trouble Code (DTC) Screen
- Wheel Speed Sensor (WSS) Screen
- Configuration Screen
- Bendix® Trailer Roll Stability Program® (TRSP®) screen
- Pressures Screen
- Bendix® Trailer Roll Stability Program® (TRSP®) Sensors
- Sensor Calibration
- Component Test Screen
- Installation Test
- Bendix® ACom® Diagnostics 6.5 Adaptive Cruise w/ Braking (ACB) Diagnostics
- ACB Data Log
- Known Issues with Bendix® ACom® Diagnostics 6.5
- 15 -
AUX I/O
The AUX I/O screen allows the technician to see how the ECU’s auxiliary inputs and outputs are
configured. This screen is read only.
Figure 15
Broadcast
The Broadcast screen allows the technician to see which J2497 and J1939 messages are (or are not)
enabled.
Figure 16
Control Buttons for Configuration Screens:
• The Modify button will open change screen
• The Save button will save the configuration file of the ECU
• The Help button will open the HELP page
• The Close button will close the screen