User guide

- 13 -
Configuration Screen
The Configuration screen provides the technician with the following information: ABS configuration, Load
and Sensor, TRSP (if equipped), ADL, AUX I/O and Broadcast options.
ABS Configuration
ABS Configuration provides the technician with the number of sensors and modulators the ECU is currently
configured to expect. Vehicle Data provides the technician with the vehicle type, the number of axles and
the ECU orientation. Odometer displays the odometer, trip and service odometer. Tire Size [RPM] / Tone
Ring displays the stored tire size and tone ring size.
Figure 11
Load and Sensor Configuration
The Sensors field provides the technician with information on how the external load sensor (if equipped) is
configured. The Bogie Load field shows the expected weight for the rear axle
– empty and fully loaded. The
Miscellaneous field shows the wheel track width and number of lift axles. The Lateral Acceleration Sensing field
provides whether the sensing type is internal or external (if equipped). The Load Sensing field displays the sensing
type (internal or external) and displays the detected air-bag pressures.
Figure 12