Operator`s manual

3.4.2 Re-Mounting Tires Using Tire Irons

To avoid damaging the sensor, simply mount the tire ensuring that the last

part of the bead to slip over the ange happens directly at the sensor. Start

at one end of the tire and work towards the opposite end with the tire oriented

so that the beads are rst pushed under the rim ange directly opposite the

sensor (1) and then worked over the ange toward the sensor (2). The bead

will nally slip over the rim ange at the sensor without contacting it (3).

Repeat for the remaining bead.

1 2 3

Figure 7