User's Manual

Page 15
6. When the CIP values have been adjusted to the desired setting, press and hold the Return
button for 3 seconds until the programming screen bellow is displayed.
7. Using the TrailerLink
™
system programming cable (Part Number K092501), connect the Tool
to the TrailerLink system harness. Refer to the TrailerLink system manual (BW2920) for
instructions.
8. Press the Check button to initiate programming. You may also press the Return button
to return to the CIP adjustment screen or press the button to return to the main menu.
9. Once programming has been initiated, the following screen appears.
10. After successful programming, this screen is shown.
11. After programming, press the Return button to exit to the main menu.
ECU
HAND
TOOL
REMOVE LED
INSERT
HARNESS