User manual

Chapter 2 2762-17 Module Description
ADVANCED MICRO CONTROLS INC.
23
The Menu System
Programming the 2762-17 from the front panel involves navigating a menu system in which
the parameters are broken down into sub-menus. The menu system layout is shown in Figure
2.3. The 2762-17 displays the current position on power up.
TRANSDUCER
SETUP
SU MENU
Transducer Type
Count Direction
Number of Turns
Scale Factor
Linear Offset
Preset Value
Upper Travel Limit
Lower Travel Limit
POSITIONIN
SETUP
SU MENU
Overshoot Offset
Low Speed Offset
Stop Offset
Target Range
RUN
PROFILE
SU MENU
Target Position
Positioning
Direction
JO
SU MENU
Displays Position.
s
,
t
Keys og
the position.
POSITION TAC TRANSDUCER
SETUP
POSITIONIN
SETUP
RUN
PROFILE
JO
MAIN MENU
Figure 2.3 2762-17 Menu System Layout
Switching between Channels
Pressing the [NEXT] key will switch between the two channels at almost every point in the
menu system. The only time you cannot switch between the two channels is when you are
setting the Positioning Direction in the Run Profile submenu. The 'D' indicator LED is on when
displaying data for channel two.
Navigating the Main Menu
The main menu is navigated with three keys, [FUNCTION], [!] , and ["]. The [FUNCTION]
and [!] keys move you one item to the right in the menu. The ["] key moves you one item to
the left.
The menu is circular. When at the Jog menu, pressing the [FUNCTION] or [!] keys will
move you to the position display. Pressing the ["] key when you are at the Position display
returns you to the Jog item.
To enter a submenu, display the appropriate menu item and press the [ENTER] key. Exiting
the last submenu item will return you to the main menu at the point you left it.