Specifications

CAB AND FRAME ACCESS
Medium Duty
(R05/09) Y53-6008A – 9 –
Cab and Frame Access
Introduction
The following section covers procedures for accessing the
cab and the frame.
Door Lock and Keys
Doors can be locked from the inside by using the lock but-
ton. Close the door then push the button down to lock.
Doors automatically unlock when you open them from
inside, and can be locked from the outside with the key
only.
As standard equipment, two keys are provided for the
doors and ignition. When necessary, additional locks and
keys are provided for storage compartments.
WARNING! To help lessen the chance and/or
severity of personal injury in case of an acci-
dent, always lock the doors while driving.
Along with using the lap shoulder belts prop-
erly, locking the doors helps prevent occu-
pants from being thrown from the vehicle.
To lock or unlock the doors from outside the cab:
• Insert the key in the door lock.
• Turn the key toward the rear door frame to lock; for-
ward to unlock.
Cab and Frame Access
The following cab and frame entry/exit procedure recom-
mendations were prepared with personal safety foremost
in mind.
WARNING! Do not jump out of the cab or get
into the cab without proper caution. You could
slip or fall, possibly suffering a serious injury.
You could slip and fall if the steps are wet or
icy, or if you step in fuel, oil, or grease.
To help avoid personal injury due to a slip or fall:
• Use three points of contact (two feet, one hand or one
foot, two hands) to grip the steps or handholds when-
ever possible and look where you are going.