Specifications

DASH- AND DOOR-MOUNTED FEATURES CONTROLS AND DISPLAY

– 54 – Y53-6008A

Medium Duty (R05/09)

cruise set speed by using the service brake pedal. The

system will not allow cruise control operation if it does not

pass the ‘rationality check’. The Driver Information Display

will prompt you to press the service brake pedal if it has

not been pressed since the vehicle has been started.

Regeneration Switch

In order to meet 2007 EPA engine emission requirements,

vehicles will have a either a two or three position switch to

help control and maintain the exhaust Diesel Particulate

Filter. Please refer to “Exhaust After-Treatment System”

on page 128 for more information about the emission con-

trol system and how it affects normal operating proce-

dures.

START

Depressing the button in the START direction for 4 to 8

seconds will initiate a parked regeneration. Be sure to

release the button to ensure that the system will begin the

regerenation cycle.

CENTER (three position switch only)

Center is the normal position of the switch.

The center position will allow an automatic regenera-

tion to occur.

STOP (three position switch only)

When STOP is pressed the system will not regenerate

under any conditions.

Two Position

Three Position

START

STOP