Technical data

TRT800H Installation and Operation
30 Dokument-Nr.: 03.2121.010.71e / Revision: 1.03
6.6 ID – Special Position Identification (SPI)
Press ID to activate transmission of the special position identification
pulse with every reply within 18 seconds; “IDT” appears on the display.
6.7 Error Codes
For possibly displayed errors refer to 6.8 Display.
6.8 Display
Line Display
1
R SE


2
PLL TRX/ANT/DC FPG BAT
3
IDT FL0100/FLerr
4
ACS/
STBY


G/F
Ex. Meaning Comment
R reply indicator showing with each answer
S
E
Squitter
Extended squitter
showing with each squitter
1224 active squawk value
PLL PLL error internal error
TRX
ANT
DC
transmitter error
antenna mismatch
internal voltage failure
check antenna (connection)
internal error
FPG FPGA dialogue error internal error
BAT low battery error check battery/charger
IDT SPI transmission SPI pressed
FL0100
FLerr
flight level (multiply by 100 ft)
faulty altitude value If the altitude value exceeds
the range of -1000 to 35000 ft,
mode C is disabled
ACS mode STBY, A-S, ACS
4444 stand-by squawk value
F
G
in-flight
on-ground
status of ground switch
(if connected)