Technical data

TRT800H Installation and Operation
21 Dokument-Nr.: 03.2121.010.71e / Revision: 1.03
List of Functions
Counter Function
1..4 just display AA/AC/FID data
o display automatically returns to STBY
5..19 change FID only (AA/AC input locked)
o turn ..X. to set cursor (“^”)
o turn .X.. to select characters
o press MOD to save and to return to STBY
20 test mode (refer to chapter 3.3)
40 display error logging
o press MOD to return to STBY
47 change ICAO-Address/Aircraft Category/FID
o turn ..X. to set cursor (“^”)
o turn .X.. to select characters
o press MOD to enter the next menu item
ground switch info
o turn .X.. to select option (Y/N)
o press MOD to enter the next menu item
configure RS232 interface (refer to chapter 3.1.6)
(For model variants refer to 1.3 Survey of Variants.)
o turn .X.. to select option
o press MOD to save and to return to STBY
o Transmission of position data is indicated by “p“ in the
upper line in the test mode.
How to enter test mode see above in this table.
From SW 3.10: After running through the first entry, another
seven entries (Records) for AA, AC, FID, etc. can be saved.
At power-on on one of the stored entries can be selected.
(Menu-driven handling.)
o select: rotary knob .X..
o next item: MODE
Turn power off and on again to activate new settings of this
item (47).