Technical data

TRT800H Installation and Operation
20 Dokument-Nr.: 03.2121.010.71e / Revision: 1.03
3.2 Configuration
Programming of the ICAOA 24-
bit Aircraft Address and of
the Aircraft Category
shall be executed by qualified
personnel only!
A wrong Aircraft Address or Flight ID may
cause serious
problems with ACAS or ATC systems!
Pilot and owner are responsible for correctly set
transponder data, which shall be checked prior to every
flight.
• press MOD (repeatedly) until “STBY” is displayed
• press and hold FID while a counter is shown right beside the
squawk value:
1224 02
12C4E619^EHUPDC
The lower line contains AA, AC and FID (“^”: cursor);
AA and AC are marked by a line above the numbers:
digits 1 to 6: ICAO 24-Bit Aircraft Address (HEX-format)
digits 7 to 8: Aircraft Category
digit 9 to 15: Flight Identification (FID)
• To select a function listed in the following table, release FID at the
corresponding counter value.