Specifications

CONFIDENTIAL
Bendix Commercial Vehicle Systems LLC
Elyria, OH 44036
PRODUCT SPECIFICATION - BW-283-PR
SPEC. BW-283-PR
73 SHEETS
SHEET NO. 52
6.1.2 Frame Mount Configuration
The TABS6 can be mounted to the frame rail or cross-member. Through-holes
are provided for use of 3/8” fasteners. Bendix recommends the minimum use of
Grade 5 bolts, nuts and washers. Typical minimum length required is 5 inches.
Figure 20: TABS6 Frame Mount
Figure 21: TABS6 Frame Mount Hole Pattern
DOCUMENTO CONTROLADO DE FORMATO ELECTRÓNICO: Antes de utilizarlo se requiere verificar el nivel de revision o la suficiencia.
CONTROLLED ELECTRONIC MEDIA DOCUMENT: Verification of revision level or adequacy is required prior to use.