Specifications

CONFIDENTIAL
Bendix Commercial Vehicle Systems LLC
Elyria, OH 44036
PRODUCT SPECIFICATION - BW-283-PR
SPEC. BW-283-PR
73 SHEETS
SHEET NO. 49
5.5.3 Bendix
®
ACOM™ Diagnostic Software
Bendix
®
ACOM™ Diagnostic Software (version 3.0 or higher) is an RP-1210A
compliant PC-based diagnostic software program that provides the highest level
of diagnostic support for the TABS6. With Bendix
®
ACOM™ Diagnostic
Software, maintenance personnel can:
• Obtain fault information (both active and inactive faults)
• Retrieve event history
• Clear inactive faults and event history
• Verify ECU configuration
• Perform system and component tests
• Read/write customer information on scratch pads
• Save and print information
• Receive troubleshooting assistance
When diagnosing the TABS6 using a PC and Bendix
®
ACOM™ Diagnostic
Software, the computer’s serial or parallel port can be connected to the vehicle’s
diagnostic connector through a RP-1210A compliant communications device.
Contact BCVS to obtain the diagnostic software.
5.5.4 Pro-Link™ Support
A Pro-Link™ device will be available to support TABS6 diagnostics. Contact
BCVS for details.
5.5.5 Trailer Remote Diagnostic Unit (TRDU)
The Bendix
®
Trailer Remote Diagnostic Unit (TRDU) is a handheld diagnostic tool
that connects to the vehicle’s diagnostic connector and provides diagnostic
information using LED’s. It is available in a variety of styles. See BW-284-PR for
details.
The TRDU also contains a magnetic reset switch to permit clearing of active
faults and a method to initiate a reconfiguration event.
The TRDU contains ten- (10) diagnostic LED’s to display system status.
LED LED Definition LED Display LED Color
VLT Voltage ECU Power Green
ECU Electronic Control Unit Fault Type Red
SEN Wheel Speed Sensor Fault Type Red
MOD1 Modulator 1 Fault Type Red
MOD2 Modulator 2 Fault Type Red
MOD3 Modulator 3 Fault Type Red
LFT Left Fault Location Red
RHT Right Fault Location Red
ADD Additional Axle Fault Location Red
ODO Odometer Mileage Blue
Table 15: TRDU – LED Description
DOCUMENTO CONTROLADO DE FORMATO ELECTRÓNICO: Antes de utilizarlo se requiere verificar el nivel de revision o la suficiencia.
CONTROLLED ELECTRONIC MEDIA DOCUMENT: Verification of revision level or adequacy is required prior to use.