Specifications

CONFIDENTIAL
Bendix Commercial Vehicle Systems LLC
Elyria, OH 44036
PRODUCT SPECIFICATION - BW-283-PR
SPEC. BW-283-PR
73 SHEETS
SHEET NO. 33
4.5.3 High Pressure Wash
The TABS6 is designed to function normally after being subjected to a high-
pressure wash to the following parameters:
Parameter Value Unit
Soapy Water Temperature 40 ± 5
°C
Soapy Water Pressure 1020 psi
Distance from TABS6 8-12 in
Flow rate 150 gal/hr
Cycle Time 3 sec (of a 6 sec cycle)
Number of Cycles 375
4.5.4 Salt Fog
The TABS6 is designed to function normally after being subjected to salt fog. At
the completion of the salt fog profile, any corrosion must be less than two-thirds
(2/3) of the TABS6 surface.
Parameter Value Unit
Temperature 35 ± 5
°C
Relative Humidity 95 ± 5 %
Salt Fog Solution 5 ± 2 %
Test Time 240 hr
4.5.5 Gravel Bombardment
The TABS6 is designed to function normally after subjected to gravel
bombardment for a total time of two (2) minutes in accordance with SAE J400.
De-graded performance is allowed only if attributed to visual damage, such as a
damaged connector.
DOCUMENTO CONTROLADO DE FORMATO ELECTRÓNICO: Antes de utilizarlo se requiere verificar el nivel de revision o la suficiencia.
CONTROLLED ELECTRONIC MEDIA DOCUMENT: Verification of revision level or adequacy is required prior to use.