User's Manual

CATALOG
BW9049 © 2002 Bendix Commercial Vehicle Systems LLC. All Rights Reserved. 12/2002. Printed in U.S.A.
13-TLR-6
Antilock
Modulator Assys.
ME-12 Modulator
IMPORTANT
REPLACEMENT INFORMATION
The
ME-12 Modulator is OBSOLETE and must be replaced with a complete MC-30 assem-
bly and pigtail wire harness. MC-30 conversion kits, which contain the MC-30, appropriate
pigtail wire harness and required air valving, have been developed to assist in the change
over. Refer to the MC-30 Conversion Kit Catalog Page for kit contents.
A maintenance kit for the ME-12 is still available and shown here.
ME-12 MAINTENANCE KIT 102802
Is still available to service the lower relay valve
section of the modulator. Solenoid and electrical
components and subassemblies are not available.
The following parts are contained in the kit:
QTY. DESCRIPTION
1 RETAINING RING
1 EXH COVER CPL
1O-RING
1O-RING
1 VALVE SPRING
1 VALVE RETAINER
1 INL & EXH VALVE
1O-RING
1O-RING
Note: The gasket (560355) used between the
controller and ME-12 modulator must be pur-
chased separately. Detail parts other than those
listed above are not available for service.
OBSOLETE
DELIVERY
PORTS
(2Vertical
2 Horizontal
)
IMPORTANT REPLACEMENT KIT NOTE
Either of two (2) MC-30 kits can be used to replace each
ME-12. The difference between the two replacement kits
shown for each ME-12 is the length of the pigtail wiring
harness included in the kit.
The first replacement kit part number shown contains a
pigtail harness that is 5 feet in length while the second
kit part number contains a pigtail harness that is 19.5
feet in length.
BRACKET MOUNTED ME-12
BRACKET MOUNTED ME-12
4 PSI CRACK PRESSURE
ME-12 Replace With
Pc. No. MC-30 Kit Pc. No.
65644 Kit Group 4
BRACKET MOUNTED ME-12
5.5 PSI CRACK PRESSURE
ME-12 Replace With
Pc. No. MC-30 Kit Pc. No.
800548 Kit Group 5
SUPPLY
PORT