User Guide
Table Of Contents
- 1. INTRODUCTION
 - 2. GETTING STARTED
 - 3. AVIATION MODE OPERATION
- BASIC OPERATION
 - VFR MOVING MAP FUNCTION
 - FLIGHT PLAN FUNCTION
 - WEATHER FUNCTION
- HARDWARE ACCESSORY
 - RECEIVING WEATHER DATA
 - XM WEATHER INFORMATION PRODUCTS
- NEXRAD Composite Reflectivity (USA and Canada)
 - Graphical METARs (USA and Canada)
 - Graphical PIREPs (USA only)
 - Graphical AIRMETs (USA only)
 - Graphical SIGMETs (USA only)
 - Graphical Conv-SIGMETs (USA only)
 - Graphical Winds Aloft (USA only)
 - Graphical Freezing Level
 - Text METARs (USA and Canada)
 - Text TAFs (USA and Canada)
 - Text PIREPs (USA only)
 - Text AIRMETs (USA only)
 - Text SIGMETs (USA only)
 - Text Conv-SIGMETs (USA only)
 - Legend
 
 - XM OVERLAYS
 
 - TRAFFIC FUNCTION
 - AUXILIARY FUNCTION
 - SYSTEM SETUP FUNCTION
 
 - 4. AUTOMOTIVE MODE OPERATION
- WARNINGS AND SAFETY INFORMATION
 - GLOSSARY
 - GETTING STARTED
- SIMPLE AND ADVANCED MODES
 - SOFT KEYS AND CONTROLS ON THE SCREEN
 - ADVANCED FUNCTIONS
- Smart Zoom
 - Position Markers
 - Current GPS Position and Lock-on-Road
 - Returning to Normal Navigation
 - Selected Location (Cursor)
 - Original Position in the Cursor Menu
 - Daytime and night color schemes
 - Color scheme in tunnels
 - Route Calculation and Recalculation
 - Itinerary
 - Track Logs
 - Route demonstration
 - POI (Points of Interest)
 - Saving POI
 - Managing POI
 - Road Safety Cameras
 - Saving Road Safety Cameras
 - Camera Warning
 - Camera Types
 - Camera Directions
 - Speed limit warning
 - TMC (Traffic Message Channel)
 
 
 - ADVANCED FEATURES IN GODRIVE VERSION 8.3
- SELECTING THE DESTINATION OF A ROUTE
- Selecting the Cursor as the destination
 - Entering an address or part of an address
 - Entering an Address (Europe)
 - Entering an Address (North America, Australia)
 - Entering an Address if house numbering is restarted
 - Enter an Address without knowing the district/suburb
 - Selecting an Intersection as the Destination
 - Selecting a City Center as the Destination
 - Entering an Address with a Postal Code
 - Tips on Entering Addresses Quickly
 - Selecting the destination from your Favorites
 - Selecting the destination from the POIs
 - Selecting the destination with saved POI search criteria
 - Selecting the destination from the History
 - Selecting the destination by entering its coordinate
 
 - CREATING A MULTI-POINT ROUTE (INSERTING A VIA POINT)
 - CREATING A MULTI-POINT ROUTE (APPEND A NEW DESTINATION)
 - EDITING THE ROUTE
 - VIEWING WHOLE ROUTE ON THE MAP (FIT TO SCREEN)
 - WATCHING THE SIMULATION OF THE ROUTE
 - ENABLING SAFETY MODE
 - PAUSING THE ACTIVE ROUTE
 - DELETING THE NEXT VIA POINT FROM THE ROUTE
 - DELETING THE ACTIVE ROUTE
 - USING TRACK LOGS
 
 - SELECTING THE DESTINATION OF A ROUTE
 - REFERENCE BOOK (ADVANCED MODE)
 
 - 5. MULTIMEDIA
 - 6. SYSTEM SETTINGS
 - 7. APPENDIX
 
AV8OR Ace User’s Guide   System Settings 
Pub. No D200904000003  Page 6-9 Rev 1 Jul 2009 
© Honeywell International Inc. Do not copy without express permission of 
Honeywell. 
Figure 6-11: Bluetooth – DUN Favorite Provider Page 
This page lets the user to enter the following data: 
•  Connection Name 
•  Phone Number 
•  User Name 
•  Password 
•  Domain 
After entering the above data, tap on the OK soft key to accept the 
data and initiate the DUN connection. 
INITIAL SETUP 
To enter the Initial Setup page, tap the “Initial Setup” soft key on 
the Settings page. The Initial Setup Menu page is displayed as 
shown below. 










