User Guide

AV8OR Ace User’s Guide Automotive Mode Operation
Pub. No D200904000003 Page 4-117 Rev 1 Jul 2009
© Honeywell International Inc. Do not copy without express permission of
Honeywell.
Device Settings
You can change some device settings to control the screen backlight
when GoDrive is running. Tap the following soft Keys:
, ,
.
Soft Key Description
Power Management You can set how the backlight will behave
when the screen has not been touched for a
while. You have the following options: •
Backlight Always On: The screen is
continuously lit. • Use Device Settings: The
backlight settings of the device will be
applied in GoDrive. • Smart: When running
on battery, Smart Powersave will light up the
screen only when you press a soft Key, tap
the screen, or if there is something to show
you. After a few seconds the light level
decreases, and after another few seconds
the backlight turns off. This helps achieve a
longer battery life.
Backlight Intensity at
Daytime
You can set the backlight level for daytime
use.
Backlight Intensity at
Night
You can set the backlight level for night use.
Autorun Enabled You can instruct the PDA to automatically
run GoDrive when the memory card is
inserted.
Set Screen
Orientation
You can change the orientation of the
screen when running. The screen
orientation can follow the current orientation
of the PDA, or you can set a fixed
orientation that is independent of the PDA
settings.