User Guide

AV8OR Ace User’s Guide Automotive Mode Operation
Pub. No D200904000003 Page 4-115 Rev 1 Jul 2009
© Honeywell International Inc. Do not copy without express permission of
Honeywell.
Soft Key Description
Speed Camera
Warning
This feature allows you to receive a warning
when approaching a Road Safety Camera. You
must ensure on your own liability that using this
feature is legal in the country where you intend
to use it. You have the following options:
• Audible Warning: beeps can be played while
you are approaching the camera, or just alert
sounds if you exceed the speed limit while
approaching one of these cameras.
• Visible Warning: the type of the camera and
the controlled speed limit appears on the Map
screen while you are approaching one of these
cameras.
Warn if Too Fast
for a Pedestrian
Enable this warning to be alert if pedestrian
mode is activated and you drive fast. You are
asked if you want to change to car navigation
mode. This way you can be sure you will not be
routed via one-way roads in the wrong direction
as a pedestrian could, for example.
Safety Mode Safety Mode disables the touch screen above
10 km/h (6 mph) to keep your attention on the
road. While driving, you will not be able to set a
new destination or to change settings. The only
screen control that remains enabled is the
gesture that puts you back on the Map screen.
GPS Settings
You can set up the connection to the GPS receiver. Tap the
following soft Keys:
, , .
Soft Key Description
GPS receive
r
The first line of the screen informs you about
the connection status of the GPS receiver.
Connecting the GPS receiver is automatic, so
normally you will not need this screen of
settings at all.