User Guide

AV8OR Ace User’s Guide Aviation Mode Operation
Messages Function
Pub. No D200904000003 Page 3-158 Rev 1 Jul 2009
© Honeywell International Inc. Do not copy without express permission of
Honeywell.
Table 3-11 Messages
Message Text
Cause
Airspace Alert
[followed by name,
type and limits of
airspace]
When airspace alerting has been
enabled and the aircraft is within the
alerting zone
Inside SUA [followed
by name, type and
limits of airspace]
When airspace alerting has been
enabled and the aircraft is inside the
airspace
Internal GPS failure
When the internal GPS is configured
but no data is being received from it
Nav data Referenced
to True North
When the operator has elected to use a
manually input magnetic variation offset
of ZERO
Nav data Referenced
to User-Defined Mag
Var
When the operator has elected to use a
manually input magnetic variation rather
than AUTO
Unit Configuration
validation errors
found, values set to
default.
Some System setting were out of range
and were set to defaults
User setting
validation errors
found, values set to
default.
Some User settings were out of range
and were set to defaults
Unit Configuration
cleared to Defaults
The System settings NVM could not be
used so default settings were used
instead
All User Settings
cleared to Defaults
The User settings NVM could not be
used so default settings were used
instead
Failed to save user
settings
All attempts to save & back up
User/System/Volatile data failed.
Unit History Data
cleared to Defaults
The Volatile settings NVM could not be
used so default settings were used
instead
Detailed terrain
database is invalid
The fine terrain database could not be
loaded from the card or its checksum
was found to be invalid.