GPS Receiver User Manual

Basic GPS Operation
3-34
Effective Date 5/95 006-08791-0000 Rev 0
Basic GPS Operation
Chapter 3
4.Rotate the right inner knob to
select the second character of the
identifier (figure 3-99).
5.Use right outer and inner knobs
as in the previous steps until the
desired identifier is completely
displayed (figure 3-100).
6.Press Fto display the waypoint
page for the selected waypoint
(figure 3-101).
7.Press Fagain to approve the
displayed waypoint page. The
screen will change to the NAV 1
page, and the selected waypoint
will now be the active Direct To
waypoint (figure 3-102).
To fly Direct To a waypoint (procedure 2):
1.Select the desired waypoint page
(APT, VOR, NDB, or SUP) on the
screen (figure 3-103) using one of
the three procedures explained in
section 3.9.
2.Press D. The Direct To page is
displayed and it contains the
desired waypoint identifier
(figure 3-104).
3.Press F. The display will revert to the NAV 1 page with the
selected waypoint as the Direct To waypoint.
APT VOR NDB SUP ACT NAV FPL CAL SET OTH
åå.ånm JJC 396
åååååå MOUNTAIN CITY
>Leg N 36°24.99'
CRSR W 81°49.46'
Figure 3-103
APT VOR NDB SUP ACT NAV FPL CAL SET OTH
åå.ånm DIRECT TO:
åååååå
#>Leg JJC
CRSR
Figure 3-104
APT VOR NDB SUP ACT NAV FPL CAL SET OTH
åå.ånm DIRECT TO:
åååååå
#>Leg KC2
CRSR
Figure 3-99
APT VOR NDB SUP ACT NAV FPL CAL SET OTH
åå.ånm DIRECT TO:
åååååå
#>Leg KCAD
CRSR
Figure 3-100
APT VOR NDB SUP ACT NAV FPL CAL SET OTH
åå.ånm KCAD 1310ft
åååååå WEXFORD CO
#>Leg CADILLAC
APT 1 MI
Figure 3-101
APT VOR NDB SUP ACT NAV FPL CAL SET OTH
76.8nm D∆ KCAD
121kt > ««««∑∏π««««
>Leg DTK167° TK168°
NAV 1 >167°To 0:41
∫
Figure 3-102