GPS Receiver User Manual

KLN 35A Pilot’s Guide Basic GPS Operation
3-13
Effective Date 5/95006-08791-0000 Rev 0
Basic GPS Operation
Chapter 3
To enter a waypoint identifier:
1. If the cursor is not on the screen
(figure 3-34), press B to turn on
the cursor function (figure 3-35).
2. If required, rotate the right outer
knob to position the cursor
(figure 3-36).
3. Rotate the right inner knob to
select the first character of the
waypoint identifier (figure 3-37).
4. Turn the right outer knob one
click clockwise to move the cur-
sor to the second character
position (figure 3-38).
5. Rotate the right inner knob to
select the second character
(figure 3-39).
6. Use the right outer and inner
knobs in this manner until the
complete waypoint identifier is
displayed (figure 3-40). Note that
you may not have to enter the
last characters of the identifier
because each time you enter a
character, the KLN 35A offers
you the first identifier in the data
base beginning with the charac-
ters you have entered.
APT VOR NDB SUP ACT NAV FPL CAL SET OTH
åå.ånm >Wpt Fr>KRDU
åååååå To>KSAV
>Leg 255nm Brg 209°
CRSR 121kt ETE 2:06
Figure 3-36
APT VOR NDB SUP ACT NAV FPL CAL SET OTH
åå.ånm >Wpt Fr>K
åååååå To>KSAV
>Leg 255nm Brg 209°
CRSR 121kt ETE 2:06
Figure 3-37
APT VOR NDB SUP ACT NAV FPL CAL SET OTH
åå.ånm >Wpt Fr>K
åååååå To>KSAV
>Leg 255nm Brg 209°
CRSR 121kt ETE 2:06
Figure 3-38
APT VOR NDB SUP ACT NAV FPL CAL SET OTH
åå.ånm >Wpt Fr>KF2
åååååå To>KSAV
>Leg 255nm Brg 209°
CRSR 121kt ETE 2:06
Figure 3-39
APT VOR NDB SUP ACT NAV FPL CAL SET OTH
åå.ånm >Wpt Fr>KFFA
åååååå To>KSAV
#>Leg 255nm Brg 209°
CRSR 121kt ETE 2:06
Figure 3-40
APT VOR NDB SUP ACT NAV FPL CAL SET OTH
åå.ånm >Wpt Fr>KRDU
åååååå To>KSAV
>Leg 255nm Brg 209°
CRSR 121kt ETE 2:06
Figure 3-35
APT VOR NDB SUP ACT NAV FPL CAL SET OTH
åå.ånm >Wpt Fr>KRDU
åååååå To>KSAV
>Leg 255nm Brg 209°
CAL 1 121kt ETE 2:06
Figure 3-34