GPS Receiver User Manual

ManualsBrandsBendix Commercial Vehicle Systems ManualsGPSBendix/King Global Positioning System KLN 35A

101

102

103

104

105

106

107

108

109

110

Advanced GPS Operation

4-4

Effective Date 5/95 006-08791-0000 Rev 0

Advanced GPS Operation

Chapter 4

This display will default to the distance presentation at power-on.

The area in the upper right hand corner of the screen is a cyclic field.

To cycle between distance and desired track display on a num-

bered flight plan page:

1. Turn on the cursor (B); it will

come up over the cyclic field,

which in this case is displaying

distance (Dis) in nautical miles

(figure 4-7).

2. Press E. The cyclic field will

change to magnetic desired track

(Dtk) (figure 4-8). An additional

E press cycles back to Dis.

4.1.3. ACTIVATING A NUMBERED FLIGHT PLAN

To activate one of the previously created numbered flight plans:

1. Use the right outer and inner

knobs to select the desired flight

plan page (figure 4-9).

2. Press B to turn on the cursor.

It will appear over Use?

(figure 4-10). If you haven’t left

the numbered flight plan since

creating this flight plan, rotate the

outer knob counterclockwise to

position the cursor over Use?

3. Press F to activate the flight

plan in the order shown

(figure 4-11). To activate the

flight plan in inverse order (first

waypoint becomes last and last

waypoint becomes first), rotate

the outer knob one step clock-

wise to position the cursor over

Use? Inverted? before pressing

F (figure 4-12).