Instructions
Table Of Contents
- 1 Allgemeine Hinweise
- 2 Bestimmungsgemäße Verwendung
- 3 Funktion
- 4 Maße
- 5 Anschluss
- 6 Bedienung
- 7 Befehl- und Datenwertbeschreibungen
- 7.1 Benennungszuordnung
- 7.2 Befehlbeschreibungen
- 7.2.1 Steuerbefehle (CTL)
- 7.2.2 SET-Befehle
- 7.2.3 GET-Befehle
- 7.2.3.1 S_VIFC_DUMMY
- 7.2.3.2 S_IMC_GET_STATUS
- 7.2.3.3 S_IMC_GET_R_ISO
- 7.2.3.4 S_IMC_GET_R_ISO_ERR_THR
- 7.2.3.5 S_IMC_GET_R_ISO_WRN_THR
- 7.2.3.6 S_IMC_GET_MEAN_FACTOR
- 7.2.3.7 S_IMC_GET_HV_1
- 7.2.3.8 S_IMC_GET_HV_2
- 7.2.3.9 S_IMC_GET_VERSION
- 7.2.3.10 S_IMC_GET_TEST_CNT
- 7.2.3.11 S_IMC_GET_MANUFACTURER
- 7.2.3.12 S_VIFC_GET_STATUS
- 7.2.3.13 S_VIFC_GET_HV_RELAIS
- 7.2.3.14 S_VIFC_GET_IMC_ALIVE
- 7.2.3.15 S_VIFC_GET_VERSION
- 7.2.3.16 S_VIFC_GET_LOCK
- 7.3 Datenwertbeschreibungen
- 7.3.1 D_IMC_SELFTEST_SCR
- 7.3.2 D_IMC_R_ISO_ERR_THR
- 7.3.3 D_IMC_R_ISO_WRN_THR
- 7.3.4 D_IMC_MEAN_FACTOR
- 7.3.5 D_IMC_STATUS
- 7.3.6 D_IMC_STATUS_EXT
- 7.3.7 D_IMC_R_ISO
- 7.3.8 D_IMC_R_ISO_BIAS
- 7.3.9 D_IMC_R_ISO_CNT
- 7.3.10 D_IMC_MANUFACT_INDEX
- 7.3.11 D_IMC_MANUFACT_DATA
- 7.3.12 D_IMC_HV_1
- 7.3.13 D_IMC_HV_2
- 7.3.14 D_IMC_VERSION_INDEX
- 7.3.15 D_IMC_VERSION
- 7.3.16 D_IMC_TEST_CNT
- 7.3.17 D_VIFC_HV_RELAIS
- 7.3.18 D_VIFC_MEASURE_MODE
- 7.3.19 D_VIFC_LOCK_MODE
- 7.3.20 D_VIFC_LOCK_PWD
- 7.3.21 D_VIFC_HV_RELAIS_STATE
- 7.3.22 D_VIFC_VERSION_INDEX
- 7.3.23 D_VIFC_VERSION
- 7.3.24 D_VIFC_IMC_ALIVE
- 7.3.25 D_VIFC_STATUS
- 7.3.26 D_IMD_ERROR_CODE
- 7.3.27 D_IMD_FAILED_CMD
- 8 Daten
