Installation & Assembly

Tighten all four screws,
two at each leg, until they are
ush with the leg surface.
5
Slide the bent part of legs into the seat
tubes. The taller (higher) portion of the leg
goes in front of the seat.
2
Tube
1 x Seat
2 x Legs
6 x Steel Allen
Screws
(includes 2 extra)
1 x Allen Wrench
(Provided)
4 x Caps
3
Place Cap, then washer
on Allen screw (Repeat 4x)
1 Lay seat upside down
on a soft surface
Tighten allen screws with
cap (from step 3) at each seat tube,
until they are ush with the leg surface
and the legs are secure.
x1
x4
4
6
Sit down, relax. Breathe deeply, feel your
senses heightening. Pay attention to your body,
notice yourself calming down, and enjoy your
new Bend Chair.
4x Steel
Washers
Cap
Washer
UNIVERSAL LEG ASEMBLY
BENDGOODS.COM
Assembly Instructions:
Unpack Box Contents Carefully For Each Chair:
Instructions apply to the following chairs:
Lucy, Ethel, Captain, Farmhouse, Bunny