Technical data

Page 7
BOILERMATE
A-CLASS
OV
1.0 DESIGN
1.2 TECHNICAL DATA
Note: The Appliance dimensions above do not allow for
the100mm high installation base
The following table of minimum cupboard dimensions only
allow the minimum space required for the appliance (including
the F & E cistern) and any extra space required for shelving etc
in the case of airing cupboards etc must be added.
Note: The above dimensions are based on the Appliance and
the F & E cistern being in the same cupboard.
If a Multi-Zone appliance is used an additional 150mm must
be added to the above heights to accomodate the space
required for the zone equipment.
APPLIANCE DIMENSIONS
MODEL Height Width Depth
A B C
BMA 125 OV 960mm 530mm 595mm
BMA 145 OV 1000mm 530mm 595mm
BMA 185 OV 1040mm 530mm 595mm
BMA 210 OV 1145mm 530mm 595mm
BMA 225 OV 1300mm 530mm 595mm
MINIMUM CUPBOARD DIMENSIONS
MODEL Height Width Depth
D E F
BMA 125 OV 1710mm 630mm 600mm
BMA 145 OV 1750mm 630mm 600mm
BMA 185 OV 1790mm 630mm 600mm
BMA 210 OV 1895mm 630mm 600mm
BMA 225 OV 2050mm 630mm 600mm
























